Acrylic universal primer TM TRIORA
-
Drying time
1-2 hour at +18-22°С and 65% RH
-
Coverage
1L per 5–10 m²
-
Тhinner
Water
-
Type of works
Inside and outside the permises
-
Containers
1 L, 5 L, 10 L
-
Drying time
24 months
The value of the product:
- Provides better adhesion of the materials
- Equalizes the water absorption
- Reduces paint consumption
- Permeable – the surface is “breathing”
- Does not cause yellowing of the paint
The appointment of the product:
Using for the preparation of the surface inside and outside the room. Could be used for different types of surfaces such as concrete, plastered, plastered, brick, and gypsum plasterboard surfaces before all types of repair work: painting, wallpapering, spackling, facing with the ceramic tiles etc
The mode of application:
Surface preparation:
- The surface must be clean, dry, strong and free from grease
- The surfaces previously coated with chalk, glue, lime or silicone paints should be cleaned from these coating completely
- If there is mold or fungus on the surface, they have to be removed with the help of BIO-protective agent TM TRIORA
Dilution:
Does not require dilution
Application:
- Must be shuffled well
- Must be applied in 1-2 layers. The second layer could be applied only after the drying of the first one
Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.